Morningstar Sunsaver SS-10L 12V

£ 67.78

Solar Charge Controller Morningstar Sunsaver SS-10L 12V 10A with 12V

The SunSaver charge controller is equipped with full electronics protection, 4-stage PWM battery charging and self-diagnostics. It is the ideal controller for oil & gas, telecommunications, instrumentation, marine & boating and solar home systems. Designed for harsh environments & easy use/install, the SunSaver’s 100% solid state design has made it the industry’s highest reliability small controller.

The Morningstar Sunsaver Duo is an advanced PWM two battery controller for caravans, boats and cottages. It can charge two seperate and isolated batteries at the same time.

The SunSaver charge controller is equipped with full electronic protections, 4-stage PWM battery charging, and self-diagnostics. It is the ideal controller for oil and gas, telecommunications, instrumentation, marine and boating, and off-grid solar home systems.

Designed for harsh environments and easy use/installation, the SunSaver’s 100% solid state design has made it the industry’s most reliable small controller. The Morningstar Sunsaver Duo is an advanced PWM two battery controller for caravans, boats and remote homes. It can charge two separate and isolated batteries at the same time.

Extremely High Reliability
• Failure rate of less than 1 per 1,000 shipped (<0.1%)
• 100% solid state. Power MOSFET design
• Manufactured in an ISO 9000 factory
• 100% pre-shipment functional testing
Longer Battery Life
• Advanced PWM charging
• Series design (not shunt) for cool operation
• 4-stage charging: bulk, absorption, float, equalize
• Optimized sealed or flooded battery set points
• Temperature compensated charging
• Low voltage load disconnect on several versions
Designed for Harsh Environments
• Temperature rating of –40°C to +60°C
• Epoxy encapsulation for protection against humidity and
  dust ingress
• Corrosion protection: marine rated terminals and anodized
  aluminum case
• Certified for use in hazardous locations
Easy to Install and Use
• Factory pre-sets result in no required install settings
• Electronic protections prevent damage from wiring mistakes
• Fully automatic operation and fault recovery
• LED’s display extensive information about status, faults and
  battery condition

Article No 321137

EAN 4250730210552
SKU 321137
Weight 0.23 (0.40) kg
L x W x H 152 x 55 x 34 mm
Shipping Parcel Post
SKU: 321137 Category:

Description

Solar Charge Controller Morningstar Sunsaver SS-10L 12V 10A with 12V

The SunSaver charge controller is equipped with full electronics protection, 4-stage PWM battery charging and self-diagnostics. It is the ideal controller for oil & gas, telecommunications, instrumentation, marine & boating and solar home systems. Designed for harsh environments & easy use/install, the SunSaver’s 100% solid state design has made it the industry’s highest reliability small controller.

The Morningstar Sunsaver Duo is an advanced PWM two battery controller for caravans, boats and cottages. It can charge two seperate and isolated batteries at the same time.

The SunSaver charge controller is equipped with full electronic protections, 4-stage PWM battery charging, and self-diagnostics. It is the ideal controller for oil and gas, telecommunications, instrumentation, marine and boating, and off-grid solar home systems.

Designed for harsh environments and easy use/installation, the SunSaver’s 100% solid state design has made it the industry’s most reliable small controller. The Morningstar Sunsaver Duo is an advanced PWM two battery controller for caravans, boats and remote homes. It can charge two separate and isolated batteries at the same time.

Extremely High Reliability
• Failure rate of less than 1 per 1,000 shipped (<0.1%)
• 100% solid state. Power MOSFET design
• Manufactured in an ISO 9000 factory
• 100% pre-shipment functional testing
Longer Battery Life
• Advanced PWM charging
• Series design (not shunt) for cool operation
• 4-stage charging: bulk, absorption, float, equalize
• Optimized sealed or flooded battery set points
• Temperature compensated charging
• Low voltage load disconnect on several versions
Designed for Harsh Environments
• Temperature rating of –40°C to +60°C
• Epoxy encapsulation for protection against humidity and
  dust ingress
• Corrosion protection: marine rated terminals and anodized
  aluminum case
• Certified for use in hazardous locations
Easy to Install and Use
• Factory pre-sets result in no required install settings
• Electronic protections prevent damage from wiring mistakes
• Fully automatic operation and fault recovery
• LED’s display extensive information about status, faults and
  battery condition

Article No 321137

Additional information

Weight 0.40 kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.