Solar Charge Controller Steca Tarom 4545-12/24

Description

Module 45 A, load 45 A, 12/24 VDC, LCD, IP31, screw terminal 25 mm², programmable, Communication interface (HS400, MPPT6000-M), data logger(SD card)

The new design for the Steca Tarom sets new standards in this class. A graphic display informs the user about important system data and enables configuration and adjustment of the controller to the specific requirements of the individual system. Several intelligent functions allow the user to adjust the controller to the particular features of a system. Thanks to the significantly improved state of charge determination, the system is optimally controlled and the batteries are protected.

The Steca Tarom charge controller is the best choice for system sizes of up to 2.400 Wp at three voltage levels (12 VDC, 24 VDC, 48 VDC). The integrated data logger stores important system data which can be read via an open Steca RS232 interface. As an option, an external temperature sensor can also be connected. Two additional switching contacts can be easily configured as a timer / a night light function, to start generators, or as surplus management. The Steca Tarom works on PWM as a low loss series controller.

Product features

• Hybrid controller
• State of charge determination (SOC)
• Automatic detection of voltage
• PWM control
• Multistage charging technology
• Load disconnection depending on SOC
• Automatic load reconnection
• Temperature compensation
• Common positive grounding or negative grounding on one terminal
• Innovative data logger
• Night light function with Steca PA 15
• Integrated self test
• Monthly maintenanccharge
• Integrated energy meter
• Two configurable multifunctional contacts

Electronic protection functions

• Overcharge protection
• Deep discharge protection
• Reverse polarity protection of module and battery
• Reverse polarity protection by internal fuse
• Automatic electronic fuse
• Short circuit protection of load and module
• Open circuit protection without battery
• Reverse current protection at night
• Overtemperature and overload protection
• Battery overvoltage shutdown

Displays

• Multifunction graphical LCD display with backlighting for operating parameters, fault messages, self test

Operation

• Simple menu-driven operation
• Programming by buttons
• Manual load switch

Interfaces

• Open Steca RS232 interface

Options

• External temperature sensor
• Alarm contact

Certificates∙

• Compliant with European Standards (CE)∙
• Made in Germany∙
• Developed in Germany
• Manufactured according to ISO 9001 and ISO 1400

Article No 321468